International distributor of Ferro Silicon Products – DMS Powders

DMS Powders is a leading international distributor of ferrosilicon products, used in the process of dense media separation of diamonds and other minerals in DMS Plants across the world. DMS Powder’s operations started in 1949, serving for over 70 years of experience in the ferrosilicon manufacturing industry. We have gained extensive knowledge about producing ferrosilicon products, and make use of a highly sophisticated production process.

If you are looking for an international distributor of ferrosilicon products, talk to a consultant at DMS Powders today. Our team will provide you with all the information you require about our specialised ferrosilicon products (Atomised and Milled ferrosilicon) that fit your needs. We will also assist with technical product support and advice. Make use of the leading international distributor of Ferrosilicon products.

Atomised FeSi: Coarse, Fine, Cyclone 60, Cyclone 40, DMS 70
Milled FeSi: 65D, 100D, 150D, 270D, 270F

What is Ferrosilicon?

Ferrosilicon is a ferroalloy (an alloy of iron and silicon) containing between 15% and 90% silicon. It also contains a high percentage of iron silicides. Its melting point is in the range of 1200°C to 1250°C. Ferrosilicon also contains 1% to 2% of calcium and aluminium. A main use of Ferrosilicon is as deoxidizer to remove oxygen from hot metal in steelmaking.

Ferrosilicon products from this international distributor

DMS Powders supplies the following Ferrosilicon products, namely Milled and Atomised Ferrosilicon:

• Milled ferrosilicon: Milled Ferrosilicon products are formed by means of a two-fold process that consist of melting and milling processes. The melting process takes place in an induction furnace, where the ferrosilicon and high grade plate steel are combined. Milled Ferrosilicon product will undergo screening and classification after it has cooled.
• Atomised ferrosilicon: Atomised Ferrosilicon is a ferrosilicon powder product which is produced by melting high purity ferrosilicon with scrap and casting into a high-pressure water jet. The high-pressure water atomisation results in a fine particle distribution, which is then separated and classified according to grade.

Packaging and distribution of Ferrosilicon from DMS Powders

Our Atomised and Milled Ferrosilicon products are conveniently packaged in easy to handle containers, making our products easy to ship locally and internationally. Our Ferrosilicon products are also available in various sized packages, that are water resistant, safe to handle and durable. Order your Ferrosilicon products from the leading international distributor if Ferrosilicon products today.

Packaging

Our packaging has been specifically designed for:

Ease of handling
Safety
Product integrity
Durability
Water resistance

125kg steel drums on pallets

250kg plastic drums on pallets

1mt & 2mt bags loose or on pallets

Contact DMS Powders today – global leaders in ferrosilicon products

DMS Powders produces a wide range of Ferrosilicon grades to suit the specific needs of our clients’ application in the dense media separation of diamonds and other minerals. The team at DMS Powders will assist you with the selection of medium according to the operating density for your specific application needs. Talk to a consultant at DMS Powders today for advice and guidance regarding our Ferrosilicon products for dense media separation – our professional and experienced team will supply you with all the necessary products information and technical support needed. Make use of the leading international distributors of dense media separation.

DMS Powders

Dense Media Separation (DMS) in Diamond Processing – DMS Powders

Dense Media Separation is a well-established separation process used in the extraction or processing of diamonds from waste material, and is widely used in the diamond processing and other mineral processing industries.

For this purpose, DMS Powders produces the ferrosilicon powders, which is used in the Dense Media Separation in diamond processing. DMS Powders is a renowned and leading supplier of ferrosilicon powders of the Dense Media Separation of diamonds. Contact DMS Powders today for more information about our ferrosilicon products available.

Atomised FeSi: Coarse, Fine, Cyclone 60, Cyclone 40, DMS 70
Milled FeSi: 65D, 100D, 150D, 270D, 270F

DMS Powders

About Ferrosilicon produced by DMS Powders

DMS Powders is a producer of Ferrosilicon, which is a ferroalloy, a chemical composition of iron and silicon. Ferrosilicon is produced by reduction of silica or sand with coke (fuel) in presence of iron.

Ferrosilicon produced by DMS Powders contain 14% – 16% Silicon (by weight) with a Relative Density of 6.8 – 7.1.

DMS Powders supplies a wide range of Ferrosilicon grades for dense media separation (DMS) in diamond processing. Different properties and characteristics of Ferrosilicon includes:

• Medium Density: The proportion of Ferrosilicon solids present in the medium directly controls the medium density, which can be increased or reduced through adding either Ferrosilicon or water respectively.
• Medium Viscosity: The medium viscosity is determined by the medium’s resistance to flow (the consistency). The higher the density, the higher the viscosity will be

• Medium Stability: The medium stability can be described as the tendency of the solids in the medium to settle out. A high stability medium is due to a high concentration of solids, fine particles size in distribution, milled (irregular) shaped particles and the presence of low density contaminating solids.
• Selection of the Medium: With such a diverse range of Ferrosilicon produced by DMS Powders, it is important to select the correct grade of medium for the specific separation application. The following aspects in should be considered, in density of separation required, size of ore to be treated, sharpness of separation required, and costs.

It has been established that the use of Ferrosilicon is a simple and very effective product for use in dense medium separation (DMS), and specifically in the diamond processing industry – on the condition that the right grade is selected for the specific application.

Packaging

Our packaging has been specifically designed for:

Ease of handling
Safety
Product integrity
Durability
Water resistance

125kg steel drums on pallets

250kg plastic drums on pallets

1mt & 2mt bags loose or on pallets

Contact DMS Powders for more information about our Ferrosilicon products

Should you be in need of the services of a trusted Ferrosilicon supplier, contact DMS Powders today. We will advise you on your best option when it comes to the different mediums and selection for your use in diamond processing. We supply Atomised and Milled Ferrosilicon products, conveniently packed for transportation and usage.

DMS Powders

Dense Media Separation (DMS) in Diamond Processing – DMS Powders

Dense Media Separation is a well-established separation process used in the extraction or processing of diamonds from waste material, and is widely used in the diamond processing and other mineral processing industries.

For this purpose, DMS Powders produces the ferrosilicon powders, which is used in the Dense Media Separation in diamond processing. DMS Powders is a renowned and leading supplier of ferrosilicon powders of the Dense Media Separation of diamonds. Contact DMS Powders today for more information about our ferrosilicon products available.

Atomised FeSi: Coarse, Fine, Cyclone 60, Cyclone 40, DMS 70
Milled FeSi: 65D, 100D, 150D, 270D, 270F

DMS Powders

About Ferrosilicon produced by DMS Powders

DMS Powders is a producer of Ferrosilicon, which is a ferroalloy, a chemical composition of iron and silicon. Ferrosilicon is produced by reduction of silica or sand with coke (fuel) in presence of iron.

Ferrosilicon produced by DMS Powders contain 14% – 16% Silicon (by weight) with a Relative Density of 6.8 – 7.1.

DMS Powders supplies a wide range of Ferrosilicon grades for dense media separation (DMS) in diamond processing. Different properties and characteristics of Ferrosilicon includes:

• Medium Density: The proportion of Ferrosilicon solids present in the medium directly controls the medium density, which can be increased or reduced through adding either Ferrosilicon or water respectively.
• Medium Viscosity: The medium viscosity is determined by the medium’s resistance to flow (the consistency). The higher the density, the higher the viscosity will be

• Medium Stability: The medium stability can be described as the tendency of the solids in the medium to settle out. A high stability medium is due to a high concentration of solids, fine particles size in distribution, milled (irregular) shaped particles and the presence of low density contaminating solids.
• Selection of the Medium: With such a diverse range of Ferrosilicon produced by DMS Powders, it is important to select the correct grade of medium for the specific separation application. The following aspects in should be considered, in density of separation required, size of ore to be treated, sharpness of separation required, and costs.

It has been established that the use of Ferrosilicon is a simple and very effective product for use in dense medium separation (DMS), and specifically in the diamond processing industry – on the condition that the right grade is selected for the specific application.

Packaging

Our packaging has been specifically designed for:

Ease of handling
Safety
Product integrity
Durability
Water resistance

125kg steel drums on pallets

250kg plastic drums on pallets

1mt & 2mt bags loose or on pallets

Contact DMS Powders for more information about our Ferrosilicon products

Should you be in need of the services of a trusted Ferrosilicon supplier, contact DMS Powders today. We will advise you on your best option when it comes to the different mediums and selection for your use in diamond processing. We supply Atomised and Milled Ferrosilicon products, conveniently packed for transportation and usage.

DMS Powders

Dense Media Separation (DMS) in Diamond Processing – DMS Powders

Dense Media Separation is a well-established separation process used in the extraction or processing of diamonds from waste material, and is widely used in the diamond processing and other mineral processing industries.

For this purpose, DMS Powders produces the ferrosilicon powders, which is used in the Dense Media Separation in diamond processing. DMS Powders is a renowned and leading supplier of ferrosilicon powders of the Dense Media Separation of diamonds. Contact DMS Powders today for more information about our ferrosilicon products available.

Atomised FeSi: Coarse, Fine, Cyclone 60, Cyclone 40, DMS 70
Milled FeSi: 65D, 100D, 150D, 270D, 270F

DMS Powders

About Ferrosilicon produced by DMS Powders

DMS Powders is a producer of Ferrosilicon, which is a ferroalloy, a chemical composition of iron and silicon. Ferrosilicon is produced by reduction of silica or sand with coke (fuel) in presence of iron.

Ferrosilicon produced by DMS Powders contain 14% – 16% Silicon (by weight) with a Relative Density of 6.8 – 7.1.

DMS Powders supplies a wide range of Ferrosilicon grades for dense media separation (DMS) in diamond processing. Different properties and characteristics of Ferrosilicon includes:

• Medium Density: The proportion of Ferrosilicon solids present in the medium directly controls the medium density, which can be increased or reduced through adding either Ferrosilicon or water respectively.
• Medium Viscosity: The medium viscosity is determined by the medium’s resistance to flow (the consistency). The higher the density, the higher the viscosity will be

• Medium Stability: The medium stability can be described as the tendency of the solids in the medium to settle out. A high stability medium is due to a high concentration of solids, fine particles size in distribution, milled (irregular) shaped particles and the presence of low density contaminating solids.
• Selection of the Medium: With such a diverse range of Ferrosilicon produced by DMS Powders, it is important to select the correct grade of medium for the specific separation application. The following aspects in should be considered, in density of separation required, size of ore to be treated, sharpness of separation required, and costs.

It has been established that the use of Ferrosilicon is a simple and very effective product for use in dense medium separation (DMS), and specifically in the diamond processing industry – on the condition that the right grade is selected for the specific application.

Packaging

Our packaging has been specifically designed for:

Ease of handling
Safety
Product integrity
Durability
Water resistance

125kg steel drums on pallets

250kg plastic drums on pallets

1mt & 2mt bags loose or on pallets

Contact DMS Powders for more information about our Ferrosilicon products

Should you be in need of the services of a trusted Ferrosilicon supplier, contact DMS Powders today. We will advise you on your best option when it comes to the different mediums and selection for your use in diamond processing. We supply Atomised and Milled Ferrosilicon products, conveniently packed for transportation and usage.